מוסד הטכניון למחקר ופיתוח - מכון המתכות הישראלי
Homepage Labs תחום התהליכים המתקדמים פרסומים -תחום התהליכים המתקדמים

פרסומים -תחום התהליכים המתקדמים

  1. A. Katz-Demyanetz, H. Rosenson, Z. Koren and M. Regev, “Bulk metallic glass formation in the Mg–Cu–Y system”, Mater. Sci. Tech. vol. 25 (2009), p. 1227-1233.
  2. M. Regev, H. Rosenson, Z. Koren, A. Katz-Demyanetz, “The influence of the cooling rate on bulk metallic glass formation in Mg80Cu15Y5 and Mg80Cu10Y10”, J. Mater. Sci. (2010) 45, p. 6365–6373.
  3. A. Katz-Demyanetz, H. Rosenson, Z. Koren and M. Regev, “Thermal Stability and DSC Studies of Melt-Spun Mg80Cu15Y5 and Mg80Cu10Y10”, J. Mater. Sci. Eng. A1 (2011), p. 168-173.
  1. A. Fleisher, A. Katz-Demyanetz, V. Popov, N. Larianovsky, N. Karni, Y. Tal, “Lead-free brass made by direct injection of CNT into shot sleeve of HPDC machine”, Die Casting Engineer vol. 9 (2015), p. 16-21.
  2. Donelli, V. Popov, E. Eshed, I. Dag, H. Abir Thermal spray aluminum optimization preliminary findings on the effects of micro-arc oxidation and its potential applications. NACE Milano Italia Section – Conference & Expo 2016 May 2016
  3. M. Regev, S. Essel and A. Katz-Demyanetz, “Microstructure characterization of melt spun Mg65Cu25Y10”, Kovove Materiali, 55 (2017), p. 1-5.
  4. N. Larianovsky, A. Katz-Demyanetz, E. Eshed and M. Regev, “Microstructure, Tensile and Creep Properties of Ta20Nb20Hf20Zr20Ti20 High Entropy Alloy”, MDPI Materials, Materials 2017, 10 (8), 883; doi:10.3390/ma10080883.
  5. E. Eshed, N. Larianovsky, A. Kovalevsky, V. Popov Jr., I. Gorbachev, V. Popov and A. Katz-Demyanetz, “Microstructural Evolution and Phase Formation in 2nd-Generation Refractory-Based High Entropy Alloys“, MDPI Materials, Materials 2018, 11(2), 175, doi:10.3390/ma11020175.
  6. V. Popov, A. Katz-Demyanetz, M. Bamberger, “Heat Transfer and Phase Formation through EBM 3D-Printing of Ti-6Al-4V Cylindrical Parts “, Defect and Diffusion Forum, Vol. 383, (2018), p. 190-195, doi:10.4028/wwwscientific.net/DDF 383.190.
  7. V. Popov, A. Katz-Demyanetz, A. Garkun, G. Muller, E. Strokin, H. Rosenson, “Effect of Hot Isostatic treatment on the Electron-Beam Melted Ti-6Al-4V specimens”, Procedia Manufacturing 21 (2018), p. 125-132.
  8. N. Larianovsky, V. Popov, A. Katz-Demyanetz, A. Fleisher, D. E. Meyers, R. S. Chaudhuri, “Production of Al Metal Matrix Composites (MMC) Reinforced with Carbon Nanotubes by Two-Stage Melt-Based HPDC – CE Method”, Journal of Engineering Mater. Technol. (2018), https://doi.org/10.1115/1.4040556.
  9. V. V. Popov Jr., A. Katz-Demyanetz, A. Garkun, M. Bamberger, “The Effect of Powder Recycling on the Mechanical Properties and Microstructure of Electron Beam Melted Ti-6Al-4V specimens”, Additive Manufacturing (2018), https://www.sciencedirect.com/science/article/pii/S2214860418303300?via%3Dihub.
  10. E. Eshed, N. Larianovsky, A. Kovalevsky and A. Katz-Demyanetz, “Effect of Zr on the Microstructure of Second- and Third-Generation BCC HEAs”, JOM 2018 The Minerals, Metals & Materials Society, https://doi.org/10.1007/s11837-018-3198-0.
  11. V. V. Popov, A. Katz-Demyanetz, A. Koptyug, M. Bamberger, “Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend”, Heliyon 5 (2019) e01188. https://doi.org/10.1016/j.heliyon.2019.e01188.
  12. I. I. Gorbachev, V. V Popov, A. Katz-Demyanetz, V. Popov, Jr., and E. Eshed, “Prediction of the Phase Composition of High-Entropy Аlloys Based on Cr–Nb–Ti–V–Zr Using the Calphad Method”, Physics of Metals and Metallography, 2019, Vol. 120, No. 4, pp. 378–386.
  13. A. Katz-Demyanetz, I.I. Gorbachev, E. Eshed, et al., High entropy Al0.5CrMoNbTa0.5 alloy: Additive manufacturing vs. casting vs. CALPHAD approval calculations, Materials Characterization 167 (2020), https://doi.org/10.1016/j.matchar.2020.110505
  14. A. Katz-Demyanetz, M. Bamberger, M. Regev, Quantitative microstructure study of melt‑spun Mg65Cu25Y10, SN Applied Sciences (2020) 2:1811, https://doi.org/10.1007/s42452-020-03522-3
  15. V. V. Popov, M.L. Grilli, A. Koptyug, L. Jaworska, A. Katz-Demyanetz, D. Klobcar, S. Balos, B. Postolnyi, S. Goel, Powder bed fusion additive manufacturing using CRM materials: a review. Materials, 14 (2021), 909, https://doi.org/10.3390/ma14040909.
  16. V.V. Popov Jr., F. Maccari, I.A. Radulov, A. Kovalevsky, A. Katz-Demyanetz and M. Bamberger, Microstructure and magnetic properties of Mn-Al-C permanent magnets produced by various techniques, Manufacturing Rev. 8, 10 (2021), https://doi.org/10.1051/mfreview/2021008.