Technion Research & Development Israel Institute of Metals
Homepage Labs Additive Manufacturing Center Research & Publications

Research & Publications

  1. V. Popov Jr., A. Katz-Demyanetz, A. Garkun, M. Bamberger, The effect of powder recycling on the mechanical properties and microstructure of electron beam melted Ti-6Al-4 V specimens, Additive Manufacturing, Vol. 22, (2018), pp. 834-843, ISSN 2214-8604, https://doi.org/10.1016/j.addma.2018.06.003 .
  2. Popov Jr., A. Katz-Demyanetz, A. Kovalevsky, R. Biletskiy, E. Strokin, A. Garkun, M. Bamberger, (2018), Effect of the hatching strategies on mechanical properties and microstructure of SEBM manufactured Ti-6Al-4V specimens. Letters on Materials, (accepted)
  3. V. Popov Jr., G. Muller-Kamskii, A. Kovalevsky, G. Dzhenzhera, E. Strokin, A. Kolomiets, J. Ramon. Design and 3D-printing of titanium bone implants: brief review of approach and clinical cases, Biomed. Eng. Lett. (2018). https://doi.org/10.1007/s13534-018-0080-5
  4. A. Koptyug, L.-E. Rännar, C. Botero, M. Bäckström, V. Popov. (2018), Blended powders can be successfully used in Electron Beam Melting yielding unique material compositions. EuroPM Proceedings (accepted).
  5. A. Koptyug, M. Bäckström, C. Botero, V. Popov, E. Chudinova. (2018), Developing new materials for Electron Beam Melting: experiences and challenges. THERMEC-2018 Proceedings (accepted).
  1. Kolomiets A., Popov V., Strokin E., Muller G., Kovalevsky A. Benefits of Additive Manufacturing for Industrial Design Development. Trends, Limitations and Applications. Global Journal of Researches in Engineering: J. 18(2), (2018).
  2. V. Popov, A. Koptyug, I. Radulov, F. Maccari, G. Muller. Prospects of additive manufacturing of rare-earth and non-rare-earth permanent magnets, Procedia Manufacturing, Vol. 21, (2018), pp. 100-108. ISSN 2351-9789, https://doi.org/10.1016/j.promfg.2018.02.199 .
  3. Popov V., Katz-Demyanetz A., Garkun A., Muller G., Strokin E., Rosenson H. Effect of Hot Isostatic Pressure treatment on the Electron-Beam Melted Ti-6Al-4V specimens, Procedia Manufacturing, Vol. 21, (2018), pp. 125-132, ISSN 2351-9789, https://doi.org/10.1016/j.promfg.2018.02.102 .
  1. Popov et al., “Heat Transfer and Phase Formation through EBM 3D-Printing of Ti-6Al-4V Cylindrical Parts“, Defect and Diffusion Forum, Vol. 383, pp. 190-195, 2018